Beko tumble-dryer error codes
Beko tumble dryers show an H or E code when the electronics detect a problem with heating, sensors or the condenser. Find your code below for meaning and safe checks.
| Code | Meaning | Severity | First action |
|---|---|---|---|
| H02 | Heater / drying fault | Often fixable at home | The dryer could not reach drying temperature in time — heater, thermostat or airflow fault. |
| E01 | Door / lock fault | Often fixable at home | The door did not close or lock correctly, so the dryer will not start. |
| E03 | Condenser / water tank fault | Often fixable at home | On condenser or heat-pump models, the water tank or condenser system reports a fault. |
Safety first
Unplug before any check. Never open panels beyond the filter flap. Anything involving internal wiring, the heater or gas must go to a professional — see each code page for its "call a professional when" line.