Beko tumble-dryer H02 error code
H02 means heater / drying fault. The dryer could not reach drying temperature in time — heater, thermostat or airflow fault..
Often fixable at home · Fault type: Electrical/hardware
Safe checks, in order of likelihood
- Clean the lint filter before every load — blocked filters cause most H02 reports.
- Check the condenser unit (on condenser models) is rinsed clean monthly.
- Check the room is not below 5°C or above 30°C — outside this range drying fails.
Call a professional when…
Clean filters and condenser; then the heater or thermostats are tested and replaced as needed. If the code returns after these checks, book a qualified engineer.
Parts usually involved
- Beko dryer heater element / thermostats.