Hotpoint tumble-dryer error codes
Hotpoint tumble dryers display an F-code or E-code when the electronics detect a fault with a sensor, heater or motor. Find your code below for meaning and safe checks.
| Code | Meaning | Severity | First action |
|---|---|---|---|
| F01 | Motor / electronics fault | Often fixable at home | The main board detected a motor or electronics fault, so the drum will not turn or the program aborts. |
| F03 | Temperature sensor fault | Often fixable at home | The drum temperature sensor is out of range, so heating is blocked until it clears. |
| F09 | Software / board fault | Engineer usually needed | The control board reported an internal software fault. |
Safety first
Unplug before any check. Never open panels beyond the filter flap. Anything involving internal wiring, the heater or gas must go to a professional — see each code page for its "call a professional when" line.